The modular design of the product range allows a number of versions with a smaller number of bearing types for enclosures and operating mechanisms|All actuators can be turned around the axis in increments of 22.5 deg|Rounded and roller plungers according to EN 50041 with 3 mm over travel (total travel 9 mm) for greater tolerance when software itching|All enclosure sizes - now also including the small enclosure 31 mm W are optionally available with an LED signaling indicator|All enclosure versions have an integrated chlorinated rubber diaphragm (high functional safety in cold and aggressive environments)|All contact blocks are replaceable|The 3-pole contact blocks are available for all enclosure sizes|Elements with 1NO-2NC slow action contacts with make before-break and 2NO-1NC|The short stroke contact block 1NO-1NC improves the precision of the software itching operation through a reduced actuation path|The contact block with 1NO-1NC snap-action contacts with 2 x 2 mm contact opening is suitable for simultaneous disconnection and signaling, particularly in the elevator industry|XL enclosures for accommodating two 2-pole or 3-pole contact blocks|The plastic enclosure with a width of 31 mm has simple and fast wiring equipment which makes it possible to save from approximate 20 to 25 % of the time when connecting|The ASI safe electric component is integrated for the versions with the AS interface connection|24 VAC at 6 A/120 VAC at 6 A/240 VAC at 4 A/400 VAC at 4 A, 24 VDC at 3 A/125 VDC at 0.55 A/250 VDC at 0.27 A/400 VDC at 0.12 A operating current